Search
N/A N/A

Job Postings

  1. Economic Development
  2. Workforce Development

Auburn Center for Developing Industries

1500 Pumphrey Avenue

  1. Email: webecondev@auburnalabama.org
  2. Phone: (334) 501-3271
  3. Hours:  M-F: 8AM-5PM

BRABHAM, AMY C

Dir of Workforce Development

  1. Phone: (334) 501-7301
  2. Email: abrabham@auburnalabama.org

If you are an employer in Auburn and would like to post your job opening(s) here, please send the job title and a brief job description with link for applying to Dr. Amy Brabham, Director of Workforce Development, abrabham@auburnalabama.org.

If you are a job seeker and would like to send us your resume, please email it to us at atc@auburnalabama.org.

2A USA, Inc.

An Italian based automotive die casting and machining company making aluminum parts for the automotive industry.

Die-Cast Tooling & Maintenance Technician: Responsible for Building and repairing all types, sizes, and shapes of jigs, fixtures, tools, and dies. Assemble and test complex tools and dies on manufacturing floor equipment; The candidate should be able to read and interpret blueprints; Operate and set-up all tool room equipment; Operate hand and small power tools; Assembles jigs, fixtures, tools, and dies; Set-up, and test dies to produce to product specifications; Investigate die cause/effect issues and make appropriate corrections; Provide and assist with set-up and modification of tools and on proper dies for production machines; May work with product designers providing input to manufacturing capability on new product lines; Responsible for troubleshooting, upkeep, preventive maintenance, making and continuous improvement of various tools, dies, jigs, and fixtures in an automotive stamping; Committed involvement with quality, cost savings, and continuous tool, die and mechanical improvements; Any other duties deemed necessary or appropriate including but not limited to die setting as required; Sets up and operates machine tools such as lathes, milling machine, shaper, and grinder, to machine parts, and verifies conformance of machined parts to specifications; Verifies dimensions, alignments, and clearances on tooling and mold spare parts; Examines standard or previously used dies, tools, and jigs and fixtures, and recommends design modifications regarding construction and function of part; All other duties as assigned by the tooling manager, die-cast manager, and/or plant manager.For more info or to apply, email resume to larry.dichiara@2ausa.com.

High Pressure Die-Cast Process Technician: Responsibilities: Stabilize, improve and standardize the existing HPDC processes, with the goal of reducing the scraps and improving the efficiency; Melting furnaces (how to tune them, clean them, degas the alloy and properly maintain them); Degassing of the alloy (how to tune them, clean them, degas the alloy and properly maintain them); Holding furnaces (how to tune them, clean them, degas the alloy and properly maintain them); Diecasting machines: program and optimize the parameters, optimize the runners, optimize the thermal systems by using the thermal camera, program and optimize the spraying, program and optimize the extracting robot, optimize the quenching; Trimming machines: program and optimize the parameters; Prepare the requests for the optimizations/modifications of the dies; Participate in the choice of new investments; Respond to immediate die casting concerns, as necessary; Responsible of performing continuous improvement activities and developing ideas on scrap reduction; Document any problems/occurrences related to die cast process control on the running history problems report and work through to resolve the problems and establish stability in the process; Responsible for process development and continuous improvement to reduce cycle times, die lubrication, scrap, etc.; Manage the development of new products and processes being launched to die casting. To apply, email resume to: larry.dichiara@2ausa.com.

Manufacturing Tech - Machining: Uses technical knowledge to troubleshoot and repair plant production CNC equipment. Performs duties associated with the setup and repair of a variety of production equipment to produce quality products. Maintains structures, electrical systems, heating systems, plumbing, machine repair, hydraulics systems for a variety of equipment; Performs various machining or bench operations to alter and repair tools, dies, fixtures, jigs, gauges and guarding; Troubleshoots and repairs equipment; performs preventative maintenance; Responsible for statistical process charting, interpretation, and trend-analysis in order to perform process or equipment adjustments to bring parts into specification; Performs other duties as assigned. To apply, email resume to: larry.dichiara@2ausa.com.

Production Manager - Machining: Job responsibilities include: Monitors and determines manufacturing costs and outlay, quality and quantity of goods produced, production methods, tooling applications, and ensures the effective use of production hours, skills, machines, equipment and facilities; Participates in planning production schedules, technical requirements and manufacturing controls related to all manufacturing operations; Expedites scheduled production, investigates and resolves delays and initiates corrective action; Coordinates operations-related programs such as manufacturing methods, cost reduction initiatives, preventive and regular maintenance, training, staffing, safety and housekeeping; Administers company rules, regulations and policies; Participates in the budgeting process, monitors and reports on manufacturing performance as it relates to budgetary guidelines; Participates in the selection and acquisition of capital equipment for the production area; Performs full range of managerial responsibilities which may include but not be limited to: interviewing, hiring, coaching and developing employees; planning, assigning and directing work; EEO/AA; performance management; department budget. To apply, email resume to: larry.dichiara@2ausa.com.

Project Engineer: Currently, we are in search of a distinguished product development engineer to join our team. As an ideal candidate, you’re a highly trained engineer with a proven history of project or program management. You are an outstanding communicator, an exceptional leader, and an even better strategist. You are ultimately responsible for delivering projects with the utmost attention to safety and quality; Manage wide range of projects from newly awarded business, machine installation and existing tooling/equipment refurbishment purchase until PPAP approval using visual tools; Determines project specifications by studying product design & customer requirements; Maintain budgetary, scheduling, and project oversight, and report regularly to plant manager to keep him/her constantly informed of project progress, plans and problems that could significantly affect costs or schedules; Controls project costs by approving expenditures and administering supplier contracts; Determines project responsibilities by identifying project phases and elements, assigning personnel to phases and elements, and reviewing bids from contractors; Developing specifications and scope for the project's needed equipment; Manage suppliers involved in the projects and monitor their timelines; Prepare Process Flow, PFMEA and control plan for all the new project working with the cross functional teams; Ensure PPAP submission and approval for all the assigned projects; Responsible to keep track and follow all the continuous improvement projects within the plant. To apply, email resume to: larry.dichiara@2ausa.com.

Aptar CSP Technologies

Headquartered in Auburn, Alabama, Aptar has six worldwide locations offering a full-service portfolio with customized solutions and expert support. Medical/Pharm manufacturing solutions to ensure product stability and extend shelf life or customized, end-to-end solutions for drug delivery systems.

WHO ARE WE

At Aptar, we use insights, design, engineering and science to create innovative packaging technologies that build brand value for our customers, and, in turn, make a meaningful difference in the lives, looks, health and homes of people around the world.

By continually bringing innovations to market every day that convert non-dispensing packaging into breakthrough product-dispensing systems, Aptar creates “a-ha moments” for its customers and their consumers and patients. These innovations give people better ways to put on their favorite fragrance, and kids the opportunity to pour ketchup without making a mess, and patients connected technologies that help them more easily adhere to treatment.

We have manufacturing facilities in North America, Europe, Asia and South America and over 13,000 dedicated employees in 18 different countries.

YOU SHOULD WORK HERE BECAUSE WE:

  • Attract and develop high performing people
  • Promote a diverse and inclusive work environment.
  • Encourage growth by allowing people to make mistakes through an open and trusting environment.
  • Invest in the development of employees through local, regional and global career opportunities.
  • Contribute to the communities where we reside.

WHAT’S NEW WITH APTAR

  • We have many new exciting positions open in Auburn!

WHAT WE OFFER:

  • Competitive base salary and performance-based bonus plan.
  • An Exciting, Diverse and value based working environment
  • Award-winning Corporate University offering personal development and training opportunities.
  • Innovative benefits plan that includes 401K plan, vacation, medical, dental, vision, life, disability, pet insurance, and generous maternity/paternity leave.

To view open positions and apply, please visit here.

Archangel Systems, Inc.

An award winning, ISO 9001:2015-certified business in Auburn, AL that develops, designs, and manufactures certified sensing and control systems for air- and ground-based applications.

Embedded Software Engineer - Aerospace: Based in Auburn, Alabama, the home of Auburn University, Archangel Systems is a pioneer in the development and manufacture of certified inertial sensor solutions for aerospace applications. Our current customer base is global and includes all aircraft classes from light helicopter to supersonic trainers and transport. We seek a highly motivated and experienced Embedded Software Engineer to be key a contributor on our software development team. The successful candidate will work in a fast-paced, small-team environment across all phases of the software development cycle from requirements definition through integration and verification of FAA certified products. Under the direct supervision of the Director of Engineering, contribute to the development team by designing, coding, integrating, and testing embedded software; Per Archangel’s DO-178 processes, participate in crafting documentation associated with the design process; Co-develop and maintain software for production support tools. To apply, please send resume and cover letter to gayla@archangel.com.

Arkal Automotive USA, Inc.

Founded in 1997 thermoplastic parts manufacturing to advance the possibilities of lightweight automotive parts design for the OEMs and Tier I automotive suppliers.

Dock Auditor (7am-3pm shift): Responsible for: Conducting quality inspections, and final release for conformance to company standards; Trains production personnel on Quality Alerts issued by the Quality Engineers; Conducts Layered Process Audits as required; Inspection work can include visual inspections, touch point inspection, or use of measuring equipment to define conformity of a part; Instructs and monitors as needed rework projects and/or sorting activities to help eliminate known defects (includes work such as deburring or replacing a component part); Quarantines non-conforming material and maintains records; Reports all non-conformances and quality related issues and their ongoing maintenance to the Quality Team Leader; Ensures that all work is carried out as per the Quality Management System ie: document control, CPK studies, SPC, etc.; Work under general supervision of the Quality Manager; Keeps records indicating results of part inspections; Follows environmental and safety regulations; Follows company regulations and maintains proper discipline at all times; Other duties as assigned by Production Manager and Quality Manager. To apply, please visit here.

Production Associate (HIRING for 2nd and 3rd shift): Duties and Responsibilities - Follow and understand work instructions; Use visual aid and limit samples; Inspect own work, identifies common defects such as: short shots, splay, flash, etc.; Removes non-conforming products from the production stream and places these items in reject bin; Uses correct packaging and quantity of parts per work instruction; Correctly starts and completes all production forms; Attaches proper bar code labels to the correct packaging; Is responsible for keeping a clean and organized work space; Works at different stations as production requires; Places all first off and fixture parts from previous shift into correct area; Completes rework on all parts requiring such at end of shift; Enlists the assistance of the production supervisor/team leader when any part is in question regarding quality; Enlists the assistance of the production supervisor/team leader when machine shuts down due to mechanical issue; Follows all health and safety requirements while performing his/her job; Ensures housekeeping responsibilities are performed each day; Ensure that safety responsibilities are performed each day; Wears proper PPE at all times; Submits all required paperwork to the production supervisor at the end of the shift; Follows safety, OSHA and organization policies and practices; Other duties as assigned by supervisor or manager. To apply, please visit here.

ATS Alabama Corporation

An automotive injection-molding company supporting the Tier and I and II auto supplier network.

No current listings

Briggs & Stratton

Headquartered in Milwaukee, Wisconsin, is the world’s largest producer of gasoline engines for outdoor power equipment, and is a leading designer, manufacturer and marketer of commercial lithium-ion batteries, power generation, pressure washer, lawn and garden, turf care and job site products.

Manager Purchasing: Approves, manages and evaluates day-to-day procurement function of the facility; Job Responsibilities include: Manages internal and external customer/supplier relationships; Measures the performance of the supply base and ensures reporting processes are in place; Develops strategically integrated sourcing strategies; Leverages total cost reductions and quality improvement recommendations; Evaluates new material, supply and service developments; Reviews and interprets supplier contracts; Oversees the approval and control of the purchasing function of the facility; Monitors and ensures quality resolution mechanisms are in place and working; Performs full range of managerial responsibilities which may include but not be limited to: interviewing, hiring, coaching and developing employees; planning, assigning and directing work; EEO/AA; performance management; department budget; For more info and to apply, visit here.

Maintenance Technician A - 2nd shift: Uses advanced technical knowledge to troubleshoot and repair all plant equipment, building and grounds. Performs a wide variety of skilled maintenance work to maintain structures, electrical systems, heating systems, plumbing, machine repair, electrical systems, hydraulics systems for a variety of equipment. Job Responsibilities include: Troubleshoots and repairs equipment using programmable logic controllers (PLC); Performs various duties relating to automation and robotics, machine shop fabrication, preventative maintenance using specialized equipment and various machining or bench operations to alter and repair tools, fixtures, gauges, and guarding; Works closely with engineers and outside vendors to resolve complex process or equipment issues in a cost effective and timely manner; Trains employees; assigns and directs work; provides feedback to supervisor regarding employee work performance; addresses complaints and resolves problems. For more info and to apply, visit here.

Manufacturing Technician A - 12 Hr Night shift: Uses advanced technical knowledge to troubleshoot and repair plant production equipment. Performs all duties associated with the setup of a variety of production equipment to produce quality products. Instructs, monitors and communicates requirements for safety, quality and production; Performs various duties relating to automation and robotics, machine shop fabrication; Works closely with engineers and outside vendors to resolve complex process or equipment issues in a cost effective and timely manner; Maintains statistical process charting, interpretation, and trend-analysis in order to perform process or equipment adjustments to bring parts into specification; Trains employees; assigns and directs work; provides feedback to supervisor regarding employee work performance; addresses complaints and resolves problems. For more info and to apply, visit here.

Manufacturing Technician B - 12 Hour Night Shift: Uses advanced technical knowledge to troubleshoot and repair plant production equipment. Performs all duties associated with the setup of a variety of production equipment to produce quality products; Instructs, monitors and communicates requirements for safety, quality and production; Performs various duties relating to automation and robotics, machine shop fabrication; Works closely with engineers and outside vendors to resolve complex process or equipment issues in a cost effective and timely manner; Maintains statistical process charting, interpretation, and trend-analysis in order to perform process or equipment adjustments to bring parts into specification; Trains employees; assigns and directs work; provides feedback to supervisor regarding employee work performance; addresses complaints and resolves problems. For more info and to apply, visit here.

Manager Operations - Aluminum: Manages operations of a small manufacturing location or section of a larger manufacturing location. Provides leadership in the areas of safety, quality, production, financial controls, plant security, OSHA compliance, quality, facilities, and manufacturing. Works with many functional areas across the company to ensure consistency in operations and related strategies. Ensures large-scale projects are completed on time, on budget and meet specified quality standards, production requirements and preset goals; Oversees specific plant operations and related support areas; Coordinates technical service activities across a broad range of internal and external assignments; Accountable for safety, quality, delivery and manufacturing costs; manages the effective use of production hours, skills, equipment and facilities; Participates in planning production schedules, requirements and manufacturing controls as related to manufacturing operations; Develops and implements strategies for operational improvement; ensures efficiency standards for all operations are met; Develops capital and other annual budgeting including evaluating the Economic Value Added (EVA) and Return on Investment (ROI) impact for location; maintains and manages established budgets throughout fiscal year to achieve financial goals; Evaluates new technologies and recommends strategies for acquisition and implementation; Drives cost reduction and continuous improvement concepts and projects to achieve annual goals; monitors and improves employee productivity and effectiveness related to operations and maintains a commitment to employee involvement; Performs full range of managerial responsibilities which may include but not be limited to: interviewing, hiring, coaching and developing employees; planning, assigning and directing work; EEO/AA; performance management; department budget. For more info and to apply, visit here.

Mechanical Engineer III: Performs engineering tasks under minimal guidance that are varied and complex which require troubleshooting and interpretation of data, development of new test methods or procedures and are used for a variety of situations. Plans, executes, and organizes detailed design development as part of major projects of significant scope. Job Responsibilities: Conducts and/or specifies complex tests using advanced techniques to resolve customer concerns/problems; prepares technical reports based on results; Applies advanced computer-aided engineering analysis techniques to resolve customer concerns/problems; Adheres to new product development processes as it relates to concept analysis, business case, product development, pre-production and post launch steps; recommends methods of manufacture during the design of new products and design modifications or process changes based on cost/design studies; Modifies analysis techniques when necessary to solve more complex problems; Evaluates product failures using advanced engineering techniques; Compiles and analyzes test results; formulates conclusions and makes appropriate recommendations; Partners with project management, business units, manufacturing, quality, supply chain, etc.; Recommends improvements and/or modifications for sequence of operations, equipment utilization and related matters; Develops engineering test standards where applicable; Performs other duties as assigned. For more info and to apply, visit here.

Operator II - 2nd Shift/10 Hrs-Home Standby: Follows complex, sequenced work instructions and performs multiple job tasks within specified cycle times and responsibilities at various workstations; Performs verification of part numbers, supplier quality, and quality checks to ensure parts are meeting quality criteria; Performs quality checks through the use of multiple tools and records results; Resets, re-starts, and performs minor adjustments to production equipment as directed; Performs required preventive equipment maintenance; Reads and verifies bill of materials (BOMs); May require interaction with customers (OEMs); Follows all established safety procedures including wearing required PPE and maintaining 5S standards. For more info and to apply, visit here.

Supervisor - Ferrous Machining - 12 Hour Night Shift: Coordinates the effective use of equipment, facilities, team members and skill sets in order to meet all safety, quality, delivery and cost requirements for a group of departments and/or multiple shifts. Job Responsibilities: Develops, trains and motivates team members to achieve desired safety, efficiency, proficiency, cooperation and morale; maintains awareness of plant and/or engineering policies and procedures and ensures employee adherence; may recommend and/or implement new plant policies and procedures; Analyzes potential production problems (delays, material shortages, equipment repairs, etc.) and devises and implements procedures to minimize lost time due to these occurrences; Reviews operational schedules, coordinates production/testing activities, and manages team member assignments; may manage for multiple departments and/or shifts; Assists with tasks such as monitoring and determining manufacturing costs and outlay, quality and quantity of goods produced, production methods, tooling applications and ensures the effective use of production hours, skills, machines, equipment and facilities; Interacts with engineers to modify machines, equipment and/or processes to improve safety, production and overall quality; provides liaison support between plant and engineering to ensure efficient manufacturing processes; Uses data to estimate work-hour requirements and departmental efficiencies for continuous improvement projects. Recommends and initiates projects; sees those projects through to deadline with measurable improvements; Manages costs and budgets and provide corrective action plans to improve budgetary control; Inspects materials and finished product for quality compliance as required; Perform full range of managerial responsibilities which may include but not be limited to: interviewing, hiring, coaching and developing employees; planning, assigning and directing work; EEO/AA; performance management; department budget; Perform other duties as assigned. For more info, and to apply visit here.

Builders First Source Millwork Corporation

Custom builder of wooden doors, windows and Moldings for the construction industry.

No current listings

CNJ, Inc.

Machines and cuts disc brakes for the automotive industry.

No current listings

Coachcomm, LLC

Develops and deploys wireless communication solutions for coaches, teams and other capabilities.

Marketing Projects Manager: We are looking for a full-time, in-house Marketing Projects Manager [MPM] to develop and manage marketing initiatives. This is not a remote position. The MPM will develop, manage, and drive email, social media, press, advertising, tradeshows, case studies and collateral projects. The Marketing Project Manager must be able to communicate with all areas of the company and will work with product management, sales, service, support, and partners to help define and maintain product messaging as well as keep our brands front and center within the respective industries. The MPM will work cohesively with staff, helping them understand product positioning, key benefits, and target customers. Projects may involve internal company operations, projects outside the scope of normal marketing operations, or involve logistical show planning and travel. This is not an entry level position. Applicants should email a resume/work history to hr@coachcomm.com.

Sr Product Engineer Firmware: Applicants should email a resume/work history to hr@coachcomm.com.

Sr Product Engineer Hardware: This is a senior level engineering position with product leadership and design responsibilities. This employee plays a key role in the design of new PCB-based, industry-compliant, embedded electronic equipment. Depending on the project, the employee will either work as an individual or as part of a multi-disciplinary team. The employee sometimes directs the work of otherengineers, designers and technicians, and performs other duties as assigned. Key responsibilities: Collect and analyze technical information from a variety of sources, including: Conversations with engineers, product managers, suppliers, etc.; technical documents, operation of equipment and their own tests & experiments; Develop design concepts for systems involving high-speed analog and digital design; techniques and interface sensors with microcontrollers/microprocessors; Develop, test and demonstrate device compliance with specifications and industry standards; Define measurement techniques, tuning procedures, special test fixtures for production use; Prepare production documentation; Leads design activities for a project and coordinates design activities with other personnel; where appropriate including the flow of information and documentation to other departments; Provide expertise for a particular product line, product technology or design area and gives; guidance to others working on designs in this area; Meet or exceed typical expectations for creativity, productivity, quality of work, and safety. Applicants should email a resume/work history to hr@coachcomm.com.

Daewon America, Inc.

Develops metal springs necessary for the automotive industry using a metal stamping process.

No current listings

Donaldson Company, Inc.

Performs welding, metal forming and painting functions for exhaust and after treatment systems using filtration technologies and processes.

EHS Manager: Responsibilities: Leads the implementation and maintenance of EHS risk assessment tools designed to identify, prioritize and control exposures to health and safety hazards or environmental impacts that can result in harm to people, property, or the environment; Leads the creation of annual, environmental, health and safety targets and objectives for the site to measurably reduce exposure to the site’s most significant health and safety risks and environmental impacts; Identifies action-based EHS goals for site leadership team members and supervisors to support achievement of site-specific EHS targets and objectives; Leads the post incident review of high-consequence EHS incidents and ensures that corrective and preventive actions addressing root causes are effectively deployed; Develops and maintains site-specific compliance assurance processes to facilitate the prompt completion of EHS-related compliance, training and preventive maintenance obligations; Leads the deployment of employee-directed environmental, health and safety teams and facilitates their engagement in ownership of the activities that enable a compliant, incident-free workplace while reducing the site’s environmental footprint; Manages development and maintenance of training processes to ensure that required environmental, health and safety training is defined, addresses required content and is tracked to completion; Coordinates utilization of Donaldson’s change management process to evaluate potential health and safety hazards and environmental impacts associated with business activity changes. May provide functional advice or training to other company locations. To apply visit here.

Donghee America, Inc.

An automotive injection molding company creating parts for OEMs and Tier I and II companies.

Maintenance Technicians: Monitor blow molding and/or welding process and maintain all related equipment; Perform any required repairs and maintenance on all production and utilities related equipment; Record all downtime and/or parts used on scheduled or non-scheduled work orders; Perform preventative maintenance per scheduled work orders and written procedures; Perform all duties with safety as a high priority. To apply, please email resume to: hopson@donghee.co.kr.

Process Technician: Essential duties and responsibilities: Assist production in maintaining the production process by ensuring the proper use of the downline and associated equipment through repeatability, procedures, etc.; Oversee and coordinate suggested improvements to the process and/or associated equipment; Assist in the design of downlines and associated equipment used in the production process; Assist Maintenance Technician, if required, to keep production from stopping; Monitor blow molding and/or welding process and maintain all related equipment; Collect data and maintain logs on all aspects of the production process; Hours: 6pm-6am (Monday-Friday and weekends); To apply, please email resume to: hopson@donghee.co.kr.

Production Specialist: Essential duties and responsibilities: Hold daily team meetings and ensure that personnel are assigned to appropriate work stations as necessary; Ensure that all Team Members are qualified to perform the assigned duties; Identify manpower requirements for the shift; Perform employee evaluations and counsel employees as required; Study downtime data and ensure all downtime is accurately recorded; Possess excellent Excel and computer skills. To apply, please email resume to: hopson@donghee.co.kr.

Shipping Clerk (2 Openings): Essential duties and responsibilities: Handle incoming and outgoing shipments by checking them physically; Check products for defects and accuracy; Ensure posting of outbound deliveries using pre-designed software; Pull, pack, and ship finished goods; Prepare and paste labels on shipments; Prepare invoices and delivery orders; Ability to drive a forklift; Hours: 6am – 6pm and 6pm -6am (Monday – Friday/some weekends). To apply, please email resume to: hopson@donghee.co.kr.

East Alabama Medical Center - EAMC (Auburn Location)

Auburn Emergency Services location developed in The Park in Auburn. Medical and support positions available to provide operation for the new location.

See flyer here for open positions.

Environmental Resource Analysts, Inc.

An industry leader in the Southeast United States for testing of various products.

Front Office Assistant: The job duties include answering phones, making copies and scanning, filing, and other administrative duties. The job will typically be from 8-5 Monday - Friday, but may occasionally be required to stay late. Desired qualities are: attention to detail, friendliness, teamwork attitude and dependability. Full time job benefits include health, dental, and vision insurance, paid personal time and paid holidays, 401K and 401K matching, access to supplemental insurances including life, disability and cancer policies, and eligibility for bonus pay. Pay: $10.00 - $12.00 per hour depending on experience. To apply, please email resume to dhughes@eralab.com.

Toxicity Lab Manager: ERA, a full service Environmental Testing laboratory, is seeking a Toxicity Laboratory Manager. The job duties would include but not be limited to: scheduling client tests according to testing availability, communicating with clients concerning analytical results, scheduling staff to accommodate the necessary daily tasks, aiding in the daily tasks, reviewing paperwork for completeness and submitting to secondary data reviewer, reviewing and suggesting changes for Toxicity laboratory quality system documents including SOPs and benchsheets, and tasks as needed. The position is Monday - Friday 8-5, but may require occasional weekend and holiday work. Candidates with a science background and management are preferred. To apply, please email resume to econsuegra@eralab.com.

FetchMe Delivery - Auburn & Opelika

A delivery service partnered with local clients located in the Auburn Center for Developing Industries (ACDI) incubator buildings.

Fetcher (Delivery Driver): Come join our team and help us continue to be the best delivery service in town! We are looking for enthusiastic, hard-working folks to help connect the people of Auburn and Opelika one delivery at a time. Whether you are looking for full-time work or just some extra cash, we have several open positions for both day and nighttime drivers. You create your own schedule and work based on your availability. Requirements: must be 18+ years old, possess valid driver's license and automotive insurance with good driving record, minimum 1 year driving experience. Previous delivery driver or other service industry experience preferred. Simply head to fetchmedelivery.com/drivers or call us at 334-209-7730 to submit your application and schedule an interview!

GE Aviation

An additive manufacturing facility developing parts for aerospace applications all over the world.

Auburn Manufacturing Associate: Assigned to work within teams as a machine operator. As a machine operator you will set-up and operate a variety of machines performing a wide variety of machining operations on aircraft engine turbine blades and other materials, parts and assemblies. Essential responsibilities: Operators will be assigned to work teams; Individuals will be required to actively participate in teams and committee; Attendance at team and committee meetings will be required; Individuals will need to apply this training to work within the teams and constantly strive to improve operation and cycle time. This will include the completion of Six Sigma and Lean projects; Operators will learn to operate every workstation and operation in the facility. Job assignments may be rotated on a daily basis; Operators will be asked to use their creativity to design, build, and assemble carts, trays, stands, and other equipment to support workstation tooling and equipment; Operators will be used to perform complicated layout operations to verify part dimensions; Operators will also be asked to operate tools and equipment ranging in size from small to large and in complexity from simple to very complicated; Perform assembly and disassembly of parts as required to machine, etc., and perform other related duties; Operators can be asked to perform other related duties, when necessary. To apply, visit here and enter search requisition R3593507.

Goodwill Southern Rivers

Career Center Specialist: The Career Center Specialist is responsible for coordinating the day-to-day activities within the Goodwill Industries of the Southern Rivers (GoodwillSR) career center with the focus of assisting and providing resources to individuals who are unemployed or underemployed. The career center with the focus of assisting and providing resources to individuals who are unemployed or underemployed. The Career Center Specialist has excellent verbal and written communication skills and has the ability to quickly and effectively develop a rapport with a wide variety of audiences. Responsibilities include aiding individuals with resources available in the career center and community, setting up class schedules, and implementing initiatives that are designed to positively impact and enhance the job search and employability skills of career center clients. Essential functions include: Greet and engage visitors and callers professionally and warmly. Perform general reception services, including answering telephones and taking messages; Coordinate the production and distribution of MailChimp emails and maintain contact list; Obtain client information and track it appropriately in the organization’s client management system; Maintain familiarity with the resources that the career center provides as well as community resources; Assist clients with using the career center’s resources; answer questions and give appropriate guidance; Support opportunities to market and promote Career Center services to local employers, social service agencies and government entities; Coordinate and/or contribute to the career center’s services, events, and programs; Contribute to the development and facilitation of Career Center orientation and classes; Assist in scheduling of classes, setting up internal interviews, and reserving training and interview rooms; Refer clients to other Goodwill SR programs and partner resources as appropriate; Assist with data entry to add information to the client management system for client contact, retention calls, class attendance, etc.; Perform filing, photocopying, mass mailings and other related activities; Conduct telephone surveys, retention phone calls, and client outreach calls; Work collectively with the center’s other team members to advertise and promote job openings, financial services, and more to clients; Ensure safe operations of equipment and facility by following and communicating safety standards; Actively participate in work groups as assigned. To apply, visit here.

Gummoon USA, LLC

Provides injection molding parts for Tier I and II companies.

No current listings

ID Plastics, L.P.

Developed an IDPack system of injection molded resuable packing for various manufacturing applications.

Process Technician I: Responsibilities include: Setup the production equipment and supplies before executing the job orders; Operate equipment safely and effectively for production processing; Ensure that equipment is maintained in good and safe working condition; Inspect equipment to identify any replacements, malfunctions, and repairs; Perform regular equipment maintenance to ensure production capacity and quality; Identifying machine faults and production rate errors; Monitor and adjust machine parameters; Quality assurance measures: testing according to test protocols and quality control; Process documentation and documentation of process changes; Aid junior operators in their assigned responsibilities; Repair and clean the equipment when needed; Can work independently or with a teammate to perform and complete the assigned duties in timely manner; Evaluate equipment performance and recommend improvements; Operate trucks and other industrial vehicles to transfer the production equipment between warehouse and working area; Follow safety procedures and company policies for equipment operation; Recommend process improvements to enhance operational efficiency and safety; Contribute to waste management programs; Identify and report unsafe operations to Supervisor/Management immediately; Maintain the work area clean, safe, and organized; Ensuring a safe working environment; Performs other duties as requested by Supervisor/Department Manager/Team Lead. To apply, email resume to Laurie Pearce: l.pearce@id-plastics.com or t.caldwell@id-plastics.com

Production Operator: Responsibilities include: Setup the production equipment and supplies before executing the job orders; Operate equipment safely and effectively for production processing; Assembly and inspection of in process components; Ensure that equipment is maintained in good and safe working condition; Inspect equipment to identify any replacements, malfunctions, and repairs; Clean the equipment when needed; Work under the guidance of Supervisor to perform and complete the assigned duties in timely manner; Evaluate equipment performance and recommend improvements; Operate trucks and other industrial vehicles to transfer the production equipment between warehouse and working area; Follow safety procedures and company policies for equipment operation; Recommend process improvements to enhance operational efficiency and safety; Contribute to waste management programs; Identify and report unsafe operations to Supervisor immediately; Maintain the work area clean, safe, and organized; Ensuring a safe working environment; Performs other duties as requested by Supervisor/Department Manager/Team Lead. To apply, email resume to Laurie Pearce: l.pearce@id-plastics.com or t.caldwell@id-plastics.com

Intramicron, Inc.

An engineering technology development and manufacturing company that serves the aerospace, chemicals, defense, and energy sectors.

No current listings

I-PEX USA Manufacturing, Inc.

Manufactures injection molding parts for the automotive industry.

Jr. Engineer: Must understand and follow ISO9001 and IATF16949 systems; Troubleshoots process problems and identifies solutions which reduce downtime and conserve maintenance costs; Measurement of product; Train production technician; Create training procedures such as troubleshoot, maintenance, measurement, and training video; Monitors process equipment to identify potential errors and develops solutions to eliminate the reoccurrence of those problems; Develops and updates process procedures to ensure that documentation is accurate and understandable; Determines the test methods, procedures, parts, and equipment needed to implement engineering changes; Identifies and resolves problems in a timely manner by gathering and analyzing information and developing solutions; Project Management - completes projects on time and budget; Looks for ways to improve and promote quality; Follows policies and procedures; Observes safety and security procedures. Reports potentially unsafe conditions; Responsible for keeping work area clean and organized; Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. To apply, email resume to Tangelia Frazier: tangelia.frazier@i-pex.com or call (334) 321-0653.

Production Technician (3): Must understand and follow IS09001 and IATF16949 systems; The Technician is responsible for meeting productivity targets on their shift; The Technician is responsible for checking production schedule daily to ensure correct machines are running; The Molding Technicians must be trained and understand IATF guidelines and must follow the IATF guidelines to ensure that quality product is being produced on their shift; The Technician must have a good background in Injection molding, robotics operation and troubleshooting and Mold Temperature Controller operations; The Technician is responsible for analyzing if mold, machine, auxiliary equipment (Mold Controller, Dryer, Hot Runner, etc.) or process condition is causing bad parts; The Technician is responsible for completing check sheets and other paperwork required in the molding area; Responsible for machine setup, maintenance issues and troubleshooting of equipment and machinery problems; Responsible for notifying maintenance of maintenance issues and will assist maintenance as necessary to make repairs. To apply, email resume to Tangelia Frazier: tangelia.frazier@i-pex.com or call (334) 321-0653.

Quality Analyst (2): Must understand and follow ISO9001 and IATF16949 systems; Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability of standards; Selects products for tests at specified stages in production process, and tests products for variety of qualities to ensure that manufactured components meet or exceed customer expectations; Records test data, applying statistical quality control procedures; Evaluates data and writes reports to validate or indicate deviations from existing standards; Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability; Sets up and performs destructive and nondestructive tests on materials, parts, or products to measure performance, life, or material characteristics; Prepares graphs or charts of data or enters data into computer for analysis; Responsible for assisting I-PEX USA Manufacturing, Inc., with IATF implementation and on-going certification to include document control and quality procedures; Must be able to identify all the basic quality gauges and be able to use them. Example: height gage, force gage, micrometer, calipers, optical comparator, measuring microscope, jigs and pin gages; Must be able to perform basic gage calibration; Must be able to understand inspection standards; Operation and minor programming of CMM vision system; Identifies and resolves problems in a timely manner; Looks for ways to improve and promote quality; Perform other related duties as required. To apply, email resume to Tangelia Frazier: tangelia.frazier@i-pex.com or call (334) 321-0653.

Quality Control Manager: Plans, coordinates, and directs quality control system and programs designed to ensure continuous production of products consistent with established standards by performing the following duties personally or through subordinate supervisors. Responsible for maintaining QS certification and implementation of ISO9001 and IATF 16949; Must understand and follow IS09001 and IATF16949 systems; Develops and analyzes statistical data and product specifications to determine present standards and establish proposed quality and reliability expectancy of finished product; Formulates and maintains quality control objectives complementary to corporate policies and goals; Creates and implements inspection criteria and procedures; Interprets quality control philosophy to key personnel in organization; Coordinates objectives with production procedures in cooperation with other managers to maximize product reliability and minimize costs; Provides inspection activity for product throughout production cycle; Applies total quality management tools and approaches to analytical and reporting processes within each department; Directs workers engaged in inspection and testing activities to ensure continuous control over materials, facilities, and products; Works with Buyer and vendors to insure quality of purchased parts for company use; Designs and implements quality control training programs; Investigates customer complaints regarding quality; Looks for ways to improve and promote quality; Controls departmental budget; creating annual plan, maintain monthly budget; Follows company policies and procedures; Performs other related duties as required. To apply, email resume to Tangelia Frazier: tangelia.frazier@i-pex.com or call (334) 321-0653.

Quality Engineer: Plans and conducts activities concerned with the quality control of industrial processes to ensure that material supply is sufficient for production demand taking corrective action when needed. The work is directly related to the management or general business operations of IUM and primary duty includes the exercise of discretion and independent judgment with respect to matters of significance including the ability to make significant decisions that directly effect financial IUM, on significant matters involving quality of up to $500 without prior approval of management. Must understand and follow ISO9001 and IATF16949 systems; Plans and conducts the analysis, inspection, design, tests, and/or integration to assure the quality of assigned product or component; Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Instrumental in obtaining and maintaining IATF certification; Applies statistical process control (SPC) methods for analyzing data to evaluate the current process and process changes; Responsible for document control for the facility and creating work procedures to meet QS standards; Reviews all purchased products or components and provide input to the decision of whether to accept the product and future purchases from the vendor; Documents data obtained during all quality assurance activities, consistent with company policies and procedures; Develops new approaches to solve problems identified during quality assurance activities; Communicates significant issues or developments identified during quality assurance activities and provides recommended process improvements to management; Prepares reports to communicate involvement and results of quality assurance activities; Prepares and presents technical and program information to team members and management; Directs technical and administrative workers engaged in quality assurance activities; Responsible for assisting Touchstone Precision, Inc. with the TS implementation and on-going certification to include document control and quality procedures. Maintains a working knowledge of IATF 16949:2016 and industry quality assurance codes and standards; Identifies and resolves problems in a timely manner; Develops project plans and coordinates projects; Manages difficult or emotional customer situations and responds promptly to customer needs. Obtains customer feedback to improve service. Visits customers to resolve any quality issues and/or concerns; Looks for ways to improve and promote quality. To apply, email resume to Tangelia Frazier: tangelia.frazier@i-pex.com or call (334) 321-0653.

Shipping & Receiving Clerk: 1st shift (7:00-3:00pm; Must be able to work overtime as needed); Pay range - $12.00-$14.00; Must understand and follow TS16949 and IATF9001 systems; Compares identifying information and counts, weighs, or measures items of incoming and outgoing shipments to verify information against bills of lading, invoices, orders, or other records; Determines method of shipment that is cost effective for IUM and customers; Affixes shipping labels on packed cartons or stencils identifying shipping information on cartons; Stamps, stencils, or glues identifying information and shipping instructions onto crates or containers; Posts weights and shipping charges and affixes postage; Unpacks and examines incoming shipments, rejects damaged items, records shortages, and corresponds with shipper to rectify damages and shortages; Examines outgoing shipments to ensure shipments meet specifications; Prepares Bills of Lading; Prepares UPS labels for freight; Operates forklift truck or uses hand truck to move, convey, or hoist shipments from shipping and receiving platform to storage or work area; Assists with written procedures in order to be in compliance with IATF standards. To apply, email resume to Tangelia Frazier: tangelia.frazier@i-pex.com or call (334) 321-0653.

K.C. Sol-Tech, Inc.

Uses machining and fabrication to develop metal racks and pallets for various industries.

No current listings

KOAM, LLC

Engineer: To apply for this position, please visit here.

Fabricator: To apply for this position, please visit here.

Machine Shop Tech's: To apply for this position, please visit here.

Leehwa America, Inc.

An injection molding company providing polyurethane parts in the automotive industry.

No current listings

Leonard Peterson & Company, Inc.

Manufactures wood laboratory casework for construction goods.

Cabinet Assembler: Seeking a Cabinet Assembler to join our team. A Cabinet Assembler assembles furniture parts to produce drawers, wall, and base cabinets. We are looking for dedicated individuals that desire to be trained to be part of our team. To apply, e-mail resume to Teresa James: teresa@lpco.com.

Cabinet Finisher: Seeking a Cabinet Finisher to join our team. A Cabinet Finisher sands, applies stain, and sprays on a sealer and finishing coat to our custom cabinetry. We are looking for dedicated individuals that desire to be trained to be part of our team. To apply, e-mail resume to Teresa James: teresa@lpco.com.

Cabinet Trimmer: Seeking a Cabinet Trimmer to join our team. A Cabinet Trimmer applies trim/hardware and or glass to drawers, doors, and cabinetry. We are looking for dedicated individuals that desire to be trained to be part of our team. To apply, e-mail resume to Teresa James: teresa@lpco.com.

Floater: Seeking an energetic person to join our team as a Floater. A Floater will move from department to department as needed. Departments include Assembly: assemble wood cabinetry. Finishing: sand, stain, and spray sealer on wood cabinets. Trim: complete assembly of cabinetry by applying hinges, doors and pulls, Machine: Use different machinery to cut wood into parts. We are looking for dedicated individuals that desire to be trained to be part of our team. To apply, e-mail resume to Teresa James: teresa@lpco.com.

Shipping Loader: Seeking a shipping loader to join our team. We are looking for dedicated individuals to move, handle and load trucks with our cabinetry. A shipping loader is responsible for wrapping our products and loading them onto trucks in a safe manner. The position requires moving, lifting, pushing, and pulling products and following the company’s policies and guidelines. . To apply, e-mail resume to Teresa James: teresa@lpco.com.

Lotte Chemical Alabama Corporation

Manufactures long glass fiber thermoplastics for automotive, chemical and materials.

No current listings

MDT Armor Corporation

Customizes and assembles armored military vehicles for the aerospace and defense industries.

Automotive Tech: Please apply here or www.indeed.com and search "MDT Armor."

Draftsman: Design, Maintain and Modify parts, parts drawings and production procedures to support current production; Develop new products under R & D. Please apply here or www.indeed.com and search "MDT Armor."

General Assembly: Job requirements - 2 years experience in industrial/manufacturing; Work with Basic Hand Tools and Small Electrical/Air Tools; Ability to follow Standard Operating Procedures; High School Diploma or Equivalent; Able to lift 50 lbs; Overtime; Supply own tools. Please apply here or www.indeed.com and search "MDT Armor."

Quality Engineer: Maintaining and implementing QSM program through internal audits; Creating and Maintaining company documentation (Quality manuals and SOP procedures); Maintaining and Controlling calibration record for all testing and inspection equipment; Analyzing, identifying and implementing manufacturing and business process improvements; Review and upload drawings, BOM and ECO’s to ensure the operational efficiency and usefulness of company data base network. Please apply here or www.indeed.com and search "MDT Armor."

Warehouse Associate: Stock approved parts in the warehouse; Issue parts to production; Inventory/cycle count parts; Maintain records/documents; Track parts shortages, control warehouse traffic; Submit purchase requests; Analyze/maximize space, operate pallet jack/fork lift; Assist shipping/receiving; Communicate and work closely with other departments; Heavy lifting and bending.  Please apply here or www.indeed.com and search "MDT Armor."

Welder: Five years previous manual welding experience preferred; Welding certificate Preferred; Work with Basic Hand Tools and Small Electrical/Air Tools; Ability to follow Standard Operating Procedures; High School Diploma or equivalent required; Be able to Lift 50 lbs; Employee required to supply their own tools. Please apply here or www.indeed.com and search "MDT Armor."

Nashville Wire Products Manufacturing Co., Inc.

Manufactures various wire form components for consumer goods.

Machine Operator Class 1, Class 2, Class 3 & Class 4: Read and understand engineering drawings. Set-up automatic or semi-automatic machine or process line in allotted time. Run automatic machine, process line, read tape measure, verify parts are produced to specifications. Works under moderate to little supervision. Previous manufacturing experience required. For Interested candidates, please email resume to: sseay@nashvillewire.com.

Set-Up Maker: Performs set-up for a variety of production machines to operate at output quality standards. Performs machine maintenance repairs, reads blueprints and copy prototypes for making set-ups. For Interested candidates, please email resume to: sseay@nashvillewire.com.

Forklift Operator: Operates industrial forklift truck to perform material handling assignments. Identify and transport material to and from storage areas, machines, loading docks, and/or trucks. Works under general supervision. For Interested candidates, please email resume to: sseay@nashvillewire.com.

PA Logic Solutions, LLC

The only independent, prescription Prior Authorization (PA) service provider in the United States. Our focus is on making the best clinical decisions for plan members while helping customers avoid unnecessary and high-cost drug spend.

Senior Software Developer - Java: Primary responsibilities include: Design architectures, including the software, hardware and communications, to support the total requirements, as well as to provide for present and future cross-functional requirements and interfaces. Interact with project management to plan project schedules and technical direction. Provide quality assurance review and the evaluation of existing and new software products. Develop high-level system design diagrams for program design, coding, testing, debugging and documentation. Develop and implement moderate to complex web applications on one or more platforms. Test, code, and debug new software and make enhancements to existing software according to specs. Performance maintenance on existing software products. Assist in the development of user manuals. Plan and manage implementation and integration of new technologies. Solve highly technical and complex problems on multiple projects and provide consultative support to internal staff. Additional responsibilities include: Architect, Design, and Build applications for prescription Prior Authorization analysis and determination; Code Reviews; Bug Fixing; Unit testing applications during development; Integration Testing; Application Support; Application Deployments. To apply, visit careers at PA Logic Solutions.

Support Technician/Reviewer: Reviews verbal and electronic prior authorization request based upon pre-established criteria and approves or denies authorization. Receives incoming calls daily from providers and/or patients seeking assistance. Make outbound calls as needed. Data enters project specific information. Project a professional company image through written and verbal interaction. May approve, deny, dismiss/early close or withdraw prior authorizations of medication according to guidelines as defined by the client; Answers incoming calls on a daily basis and in a timely manner. Assists callers with questions regarding approval or denial on medications. Researches issues and resolves the issue. Document caller’s questions, issues, and resolution; Data enters information into the PAL/Client database. Corrects errors, if needed; Process requests for information (RFIs) for client accounts; Performs monitoring tasks of the PAL/Client database. Notifies management of errors and/or problems; Maintain compliance with all company policies and procedures; Willing to work flexible shifts, including nights, weekends and holidays; Perform related duties as assigned by supervisor; Meet and/or exceed production, quality, attendance and adherence standards; Provide/assist in training of other employees; Subject to fingerprinting and background screenings as required. To apply, visit careers at PA Logic Solutions.

Pyongsan America, Inc.

Assembles hoses and pipes for the automotive industry.

No current listings

Rausch & Pausch, L.P.

Provides automated assembly of solenoid valves for the automotive industry.

Assembly Operators: 3rd shift assembly operators needed - Monday-Thursday 9:00 p.m. - 7:00 a.m. (4/10's). To see full job description, visit here. You may also email your resume to jobs@rapa.com.

IT Process Specialist: To see full job description, visit here. You may also email your resume to jobs@rapa.com.

Product Design Engineer: To see full job description, visit here. You may also email your resume to jobs@rapa.com.

Revere Plastics Systems, LLC

Focuses on manufacturing plastic components for automotive.

Machine Operator: We are currently hiring for 1ST SHIFT-Monday-Friday (6:30am to 2:30pm); 2ND SHIFT-Monday-Friday (2:30 pm to 10:30 pm) and 3RD SHIFT-Monday-Friday (10:30 pm to 6:30 am). To apply, email resume to: dchenoweth@rpsystems.com.

Process Technician: Main responsibilities include: Responsible for machine start-ups producing parts for numerous customers; Communicating with Supervisor concerning mold changes, problem areas, etc.; Coordinating and training machine operators to help with first response for machine failures; First response to all machine, robot, thermolater and secondary equipment alarms; Ensure machines and robots are running at optimum efficiency; Troubleshoot machine, mold and material issues; Responsible for the accurate completion of Process Verification and Master Set-up Sheets; Responsible for maintaining the appearance of all thermolaters, Robot Control Stations, DME units, etc.; Ensures proper care of all equipment especially the managing and proper disposal of all purgings; Drive the reduction of scrap through elimination of mold conditions using corrective action and mold repair items; Responsible to follow all OSHA and safety rules and regulations. To apply, email resume to: dchenoweth@rpsystems.com.

Regal Rexnord Corporation

Offers Power Transmission Gear Drives, Bearings, Couplings, Industrial Chain, Brakes, PT Drive Components and Conveying Solutions to enhance the reliability of equipment for various industries.

Machinist: Set up and operation of machines such as CNC machines. Works from drawings and written instruc-tions. Requires basic knowledge of various metals and of measurements. HS Diploma or equivalent and 2 years experi-ence. Interested candidates, apply here.

Shipping Coordinator: Verifies the accuracy of incoming and outgoing shipments and orders. Compares identifying information with bills of lading, invoices, orders or other records. Verifies that materials received are as ordered. May route incoming items within the company as directed. May utilize hand trucks, forklifts, hoists, conveyors, overhead crane, or other handling equipment to move material to and from and within the facility. HS Diploma or equivalent and 2 years experience. Apply at www.rexnordcorp.com.

Rice Signs, LLC

Manufactures signage for traffic and construction industries.

No current listings

SCA, Inc.

Manufactures plastic components for the automotive industry.

HR Generalist: Develop job descriptions and maintain job description database; Administer performance management processes and systems; Maintenance of compensation programs; Establish and maintain positive, customer service focused relationships demonstrating professionalism and trustworthiness; Maintain compliance with federal, state, and local employment laws and regulations; Manage onboarding processes including HRIS processes, forms completion, new hire and manager communications, etc.; Provide support with Employee Relations issues; Create and maintain required HR Records ensuring appropriate retention; Prepare and maintain I-9 forms and Team Member files; Complete employment verifications including salary information, status change forms and ensure proper forms are signed; Process bi-weekly payroll, perform administration of benefits, support open enrollment and monthly invoice reconciliation and enrollment/terminations; Perform various administrative tasks and other duties assigned. To apply, email resume to: scahr@scaalabama.net.

Quality Specialist: The Quality Specialist will maintain documentation, procedures and compliance related to ISO, IATF, PPAP and internal quality requirements; perform inspections as needed to ensure product quality; drive continuous improvement through QC processes; participate in the process of investigating & responding to customer complaints; review and qualify data; play an active role in quality improvement and organization. Excellent computer skills (Excel, Word, etc.). To apply, email resume to: scahr@scaalabama.net.

Production Control Specialist: Job Duties and Responsibilities include: Production scheduling and ERP management; Gather actual data and analyze productivity; Proper completion and filing of essential reports; Control and manage product inventory; Use and utilize ERP for production scheduling and inventory management; Upload/update daily work schedules for assembly/injection/PET or any other production related department; Check production progress, and check when having shortage of any item inventory, then follow up with related department; Manage Goods Issued/Goods Received on ERP for purchasing parts; Adjust daily/weekly schedules to minimize downtimes or losses due to absenteeism or product quality issues; Analyze daily productivity, efficiency, and work results of each production line; Attend production meeting or other production related meetings. Make a presentation of productivity analysis or ERP GI/GR issues and countermeasures for such problems; Manage blank forms and inventory tags (managed items are not limited to the items mentioned in this job description); Coordinate with all related departments and support activities outlined by management; Be a part of productivity improvement activities in the plant. To apply, email resume to: scahr@scaalabama.net.

Production Supervisor: The Production Supervisor is responsible for day to day management and scheduling of multiple production lines to ensure production goals are met; ensure production lines are operational and maintaining the ongoing production of product to include meeting quality standards and requirements; ensure new Team Members are trained; perform daily administrative tasks related to Time & Attendance recordkeeping and disciplinary action; report daily production numbers to Management; ensure health, safety and well-being of Team Members; Ability to stand for long periods of time (shift is 12 hours); strong organizational and computer skills; ability to complete daily reports, train and mentor Team Members. Day and Night Shift available. To apply, email resume to: scahr@scaalabama.net.

Team Lead: The Team Lead will be responsible for ensuring new Team Members are trained; communicate daily expectations, assignments and responsibilities clearly and professionally to all Team Members; fill in on the production line as needed; ensure daily records are maintained to include production reports, Team Member sign in rosters, etc.; work with the Production Supervisor to ensure daily production goals are met while maintaining quality, health and safety standards; Ability to stand for long periods of time (shift is 12 hours); strong organizational skills; Day and Night Shift available. To apply, email resume to: scahr@scaalabama.net.

Operators (Assembly & Injection Molding): Operators needed for 12 hour shift (day and night available). Ability to stand for extended periods of time, perform hand and machine assembly processes, use hand tools, perform inspection processes, meet production and quality standards. Follow health, safety and environmental established policies. To apply, email resume to: scahr@scaalabama.net.

SCA Innotive

Manufactures plastic components for the automotive industry.

Assembly Team Member (Lower Glue, Press, Filter): Essential duties and responsibilities: Must be able to perform repetitive motion in an assembly process; Assembly work requires standing for extended periods of time, no sitting permitted; Team Member must be able to lift 40 pounds without assistance; Assembly work requires continuous movement; twisting, bending, walking; Assembly work requires Team Members to have good eye/hand coordination; Assembly work checks for damages and defects and monitors quality closely; This job description in no way implies that these are the only duties to be performed. An employee will be required to follow any other job-related duties required by the manager. To apply, email resume to: choi@scaalabama.net.

Schmidt Automotive USA, L.P.

Offers automated machining and assembly of powertrain components for the automotive industry.

CNC Operator: Machines parts by programming, setting up, and operating a computer numerical (CNC) machine; will ensure that all high automotive quality standards are met; will ensure that production goals are met; will keep records; will maintain equipment and supplies; will communicate with co-workers to ensure an efficient production, will maintain a clean, organized and safe work environment so that the highest level of product quality is guaranteed. To apply, please email resume to: K.Brooks@schmidt-cnc.de.

Seohan Auto USA/Seohan-NTN Driveshaft USA Corporation

Provides automated machining and assembly of axles and driveshafts for the automotive industry.

No current listings

Shinhwa Auto USA Corporation

An aluminum die casting and machining operation for the automotive industry.

Assembly Operator: Remove finished metal products from the conveyor belt; Sort and pack products into a container; Perform visual inspection on products produced; Periodically checks products, per company policy, to ensure quality and uniform completion; Resolves any identified problems and alerts supervisor. To apply, please email resume to: sheng116@shinhwa-eng.com.

Casting Operator: Observe continuous operation of automatic machines to ensure that products meet specifications and to detect jams or malfunctions, making adjustments as necessary; Operate or tend to casting machines; Inspect metal products; Measure dimensions of completed products or workpieces to verify conformance to specifications; Monitor equipment operation to ensure that products are not flawed; Operate metal forming equipment; Adjust temperature controls of heating equipment. To apply, please email resume to: sheng116@shinhwa-eng.com.

Melting Operator: Sets-up and operates die-casting machine to melt aluminum parts; Preheats die sections with torch or electric heater; Inspect castings using fixed gauges; Load metal ingots into melting furnace and transfer molten metal to heated reservoir of die-casting machine using hand ladle; Operate forklift to transport melted aluminum to casting area. To apply, please email resume to: sheng116@shinhwa-eng.com.

Maintenance Technician: Maintain and repair machines, mechanical equipment, and buildings; Fix or replace faulty electrical switches, outlets, and circuit breakers; Inspect and diagnose problems and figure out the best way to correct them; Perform routine preventive maintenance to ensure that machines continue to run smoothly; Assemble and set-up machinery or equipment; Do general cleaning and upkeep of buildings and properties; Order supplies from catalogs and storerooms; Meet with clients to estimate repairs and costs. To apply, please email resume to: sheng116@shinhwa-eng.com.

Mold Maintenance Technician: Read technical manuals to understand equipment and controls; Disassemble machinery and equipment when there is a problem; Repair or replace broken or malfunctioning components; Perform tests and run initial batches to make sure that the machine is running smoothly; Detect minor problems by performing basic diagnostic tests; Test malfunctioning machinery to determine whether major repairs are needed; Adjust and calibrate equipment and machinery to optimal specifications; Clean, lubricate, and move machinery and equipment; Keep machines in working order by detecting and correcting errors before the machine or the products it produces are damaged; Use technical manuals, their understanding of industrial equipment, and observation to determine the cause of a problem; After diagnosing a problem, may take the equipment apart to repair or replace the necessary parts. Once a repair is made, test a machine to ensure that it is operating correctly; Use lathes, grinders, drill presses, and welder; Perform basic maintenance and repairs on machines; Must follow machine specifications and adhere to maintenance schedules; Use a variety of tools to do repairs and preventive maintenance. To apply, please email resume to: sheng116@shinhwa-eng.com.

Quality Inspector: Examine products or work to verify conformance to specifications; Recommend adjustments to the assembly or production process; Inspect, test, or measure materials or products being produced; Measure products with rulers, calipers, gauges, or micrometers; Operate electronic inspection equipment and software; Accept or reject finished items; Remove all products and materials that fail to meet specifications; Report inspection and test data such as weights, temperatures, grades, and quantities inspected; Demonstrated initiative, ability to work with others, and good professional judgment; Ability to work independently and organize time effectively. To apply, please email resume to: sheng116@shinhwa-eng.com.

Sio2 Medical Products, Inc.

Manufactures medical labware and consumables across the healthcare spectrum.

Analytical Lab Technician: The Technician is responsible for performing wet and dry analytical methods, operating analytical instrumentation, collecting and compiling data, and maintaining and revising test procedures. The Lab Technician will analyze routine and investigational samples using established methodologies in support of Production. The Lab Technician may work with senior staff to assist in the evaluation and validation of analytical methods that will be used in both development and production. To apply, please email resume to: raven.dowdell@sio2med.com.

Automation Technician I: Integrate and support SiO2 automation systems. Uses basic technical skills to operate, maintain, troubleshoot, repair, and set up plant production equipment. This is a progressive position. With appropriate training and experience the Automation Technician I will be on the path to Automation Technician II. Duties and Responsibilities: Operate production equipment in assigned area; Monitor requirements for safety, quality, and production; Drive continuous improvement by assessing plant processes and identify opportunity for process and automation opportunities to improve quality and productivity; Support maintenance team with advanced mechanical and electrical troubleshooting opportunities and identifying opportunities for value added improvements; Collaborate with Operations and Maintenance teams to ensure equipment is properly operated and maintained; Maintain process sensors maintenance; complete sensor verification, analyze issues, and recommend solutions; Coordinate changeovers and ensure accuracy; Perform basic equipment repairs within scope of work; Execute preventative and general maintenance as needed; Complete training to enhance and advance skills. To apply, please email resume to: raven.dowdell@sio2med.com.

Lead Analytical Lab Technician: The Lab Technician Lead position operates analytical chemistry equipment. The Lab Technician is responsible for using scientific and experimental methods & statistical techniques to identify and optimize process outputs for a proprietary medical device. The Lab Technician will work with the Lead Scientist to develop analytical methods that will be used in both development and production. Develops testing schedules and assigns to staff. Tracks inventory and supplies. To apply, please email resume to: raven.dowdell@sio2med.com.

Maintenance Technician: The Maintenance Technician reports directly to the Maintenance Manager. This position will be responsible for new equipment fabrication, troubleshooting problems on existing equipment, and performing preventive maintenance. Must take pride in maintaining equipment in the production and development areas. Must take preventive measures where possible to prevent downtime from equipment problems. And must be committed to producing Quality work at all times. To apply, please email resume to: raven.dowdell@sio2med.com.

Production Technician: The Production Technician position operates coating, molding and/or testing equipment. The Technician is responsible for using Forms and Procedures to identify and optimize process outputs for a proprietary medical device. The Production Technician will work with the Production Team Leaders and Engineers to maximize coating and testing methods that will be used in both development and production. To apply, please email resume to: raven.dowdell@sio2med.com.

Quality Technician: Performs quality assurance inspections that includes all visual, and any functional testing that are required as a part of the component release documentation related to the manufacturing process of products. Inspects materials, parts and products at various stages of production against specification. Records observations and may make recommendation for improving processes. Inspects the production processes and documentation as it relates to the SiO2 Medical Products Manufacturing operations to be in compliance with SiO2 Medical Products policies, SOP, cGMP, ISO13485, ISO 15378, ISO 9001, and the SiO2 Medical Products Quality Manual. Perform and document all Batch Release Inspections for the operations that can include SPC and COA Documentation. To apply, please email resume to: raven.dowdell@sio2med.com.

Quality Inspector I: Performs quality assurance inspections that includes all visual, and any functional testing that are required as a part of the component release documentation related to the manufacturing process of products. Responsibilities include: Inspects materials, parts and products at various stages of production against specification; Records observations and may make recommendation for improving processes; Inspects the production processes and documentation as it relates to the SiO2 Medical Products Manufacturing operations to be in compliance with SiO2 Medical Products policies, SOP, cGMP, ISO13485, ISO 15378, and ISO 9001 standards, as well as the SiO2 Medical Products Quality Manual; Performs and document all Batch Release Inspections for the operations that can include SPC and COA Documentation. To apply, please email resume to: raven.dowdell@sio2med.com.

Sodecia Automotive Auburn, L.P.

Manufactures metal components for the automotive industry.

No current listings

Straehle + Hess USA, Inc.

Manufactures customized textile applications for the automotive industry.

No current listings

SwiftSku

Helps independent convenience store owners onboard their c-store with the latest technology to leverage promotional discounts and increase revenue with State of the Art Business Intelligence.

Hardware Engineer: We are looking for a committed full time Hardware Provisioning Technician to join our founding team. You must have at least 3 years of experience with Raspberry Pi and Python scripting. You will write code with our awesome dev team while brainstorming and cracking jokes to find novel solutions that shake the industry. To apply, please visit here.

Technician: A detail oriented provisioning technician who will be doing the provisioning, packaging, and shipping of our hardware from our office in Auburn, AL. This role isn’t highly technical, however, you should be familiar with basic linux commands. You will have to read the provisioning guide and follow the given instructions meticulously. This will be a part-time role and will require punctuality. Key Responsibilities; Validate Addresses provided by Sales team; Unpackage the hardware device (Rock Pi E); Flash software on to memory card and obtain serial numbers; Generate labels with serial numbers and generate Shipping Labels; Package the modules and send to the customers; Pack boxes and deliver them to the post office. To submit applications, kindly use our careers page here and fill in the required details.

Thermo Fisher Scientific, Inc.

Manufactures plastics packaging for the medical and dairy industries.

Drug Line Material Handler (12 Hour Night Shift & 12 Hour Day Shift): Responsibilities include - Gathers materials and supplies needed for Drug Line operation to comply with approved procedures. Loads hoppers with vials and poker chip as needed. Orientating and stacking of cups into cup hopper. Performs visual inspection on all materials used and report problems to the Drug Kit Supervisor. Documents all materials to comply with Drug Line approved procedures. Helps remove trash at end of shift. Performs any tasks necessary to help complete production. If you have an interest in applying, please go to Thermofisher.com and look for the job opportunities link.

Maintenance Technician (12 Hour Night Shift): Performs non-routine maintenance on injection molding presses. Troubleshoots presses when problems occur which could include hydraulics, penumatics and mechanical fixes. Assist and/or fill in for automation technician when necessary. Fills in for floor maintenance as needed. Records mold and press maintenance. Assist in automation repair/changeover when needed. Performs quality checks and machine adjustments as needed to maximize product quality, rates of production, etc. Communicates directly with Maintenance Manager throughout the shift with updates about ongoing problems and projects. Assists building mechanic with machine spare component inventory. Preventative maintenance – maintaining cleanliness and performance of machines. Performs other duties as requested by Department Manager. If you have an interest in applying, please go to Thermofisher.com and look for the job opportunities link.

Mold Operator/Material Handler (12 Hour Day Shift & 12 Hour Night Shift): Responsibilities include - Stock molding rooms with necessary supplies during shift and at the end of shift before shift change; Immediately notifies maintenance/processing of any quality or downtime issues; Pulls full boxes/crates from under machines; Inspects parts for any defects or quality issues before closing box/crate; Close all boxes/crates, weigh, apply label and stage; Bring in any colorant or resin, as directed by production supervisor; Moves all finished products to holding areas; Sort quarantine created by your assigned machines, when time permits; Removes and weighs all scrap by product and submits to supervisor on scrap log sheet; Keep assigned machines clean including the floor under and around machines; Takes all trash to dumpster; Cover for other Mold Operator during breaks; Assures all documentation and labeling is correct on all presses daily; Pulls samples and submits to lab as required; Performs other duties as requested by Production Supervisor or Molding Department Manager. If you have an interest in applying, please go to Thermofisher.com and look for the job opportunities link.

Mold Setter (8 Hours Monday - Friday): The Mold Set-Up Technician is responsible for the safe and proper handling of molds including Communication with Production Manager, Maintenance Manager, Process Engineer on needs and requirements for getting setup completed so startup can occur in timely manner. If you have an interest in applying, please go to Thermofisher.com and look for the job opportunities link.

Process Engineering Technician (12 Hour Night Shift): Responsible for assigned process assignments with our injection molding machines, monitoring of the machines process parameters and assist in maintaining those parameters. If you have an interest in applying, please go to Thermofisher.com and look for the job opportunities link.

Webster Fulfillment

Provides warehousing and distribution for E-Commerce companies as a 3rd party logistics provider.

Boutique Fulfillment Center Associate: We are seeking associates who are excited and eager to join our fast-growing team! Currently, we’re seeking Warehouse Shipping & Receiving Associates who are responsible for handling all product as it enters the building, preparing it for shipping, stowing it in inventory, pulling and shipping orders! Responsibilities include: Receive, inspect, bag, and tag our new arrivals with speed, efficiency, and accuracy; Pull and ship orders that are bound for our fabulous customers; Organize the warehouse while coming up with new ways to improve our processes; Be available to complete various tasks in the day related to shipping/receiving/inventory management. To apply, please email resume to careers@webster-fulfillment.com

Weekends/Nights Boutique Fulfillment Center Associate: We are seeking associates who are excited and eager to join our fast-growing team! Currently, we’re seeking Warehouse Shipping & Receiving Associates who are responsible for handling all product as it enters the building, preparing it for shipping, stowing it in inventory, pulling and shipping orders! Receive, inspect, bag, and tag our new arrivals with speed, efficiency, and accuracy; Pull and ship orders that are bound for our fabulous customers; Organize the warehouse while coming up with new ways to improve our processes; Be available to complete various tasks in the day related to shipping/receiving/inventory management. To apply, please email resume to careers@webster-fulfillment.com.

Wheel Pros

Manufactures aluminum wheels for the aftermarket automotive wheel market.

Job Openings for all shifts (1st, 2nd, 3rd, and Pitman shifts available)

Hourly positions starting at $15/hour up to $33.92/hour

Openings include: Casting Engineer; Casting Supervisor; Casting Set-up Technician; Melting Team Lead; Melting Operators; Casters; Heat Treat Loading; Forklift Drivers; Tool Shop Lead Operators; Mold Technician; Tool Shop Operator; Die Maintenance; Machining Supervisor; Production Operators; CNC Technicians; Haas Equipment Operators; Rework Operators; Finishing Team Leads; Finishers; Diamond Cut Milling Team Leads; Diamond Cut Milling Operators; Manufacturing Manager; Paint Removal Polishing Coordinator; Paint End of Line Supervisor; Paint Removal Operators; Paint Loading Lead; Loaders; Masking Operators; Paint Prime Operator; End of Line Final Inspection Leads; End of Line Final Assemblers; Packaging; Paint Maintenance Technicians; Maintenance Technicians; Automation Technician; Testing Engineer; X-Ray Operator; CMM Lab Technician; SAP/Production Scheduler

To apply, please email resume to tanya.speir@wheelpros.com.

Winkelmann Flowform Technology, L.P.

Manufactures parts for the aerospace, defense, and industrial applications.

Part Time Accountant: This is a position requiring an understanding of accounting fundamentals and principles, as well as good practices required for bookkeeping. Support position of monthly reconciliations and closing. Accountant will be responsible for: journal entries, AP/AR, inventory, analyzing actual manufacturing costs and preparing periodic reports comparing standard costs to actual production costs. Understanding of Dynamics 365 a plus. Degree in Business or accounting with at least 5 years’ experience in manufacturing accounting. To apply, email resume to Pam Breedlove: pamela.breedlove@winkelmann-flowforming.us.

Technical Sales Engineer: This is more than just a sales position. As a valued member of a highly skilled team, the Technical Sales Engineer will support the growth of WFT with a primary focus of new customer/program acquisition via a cross-functional Sales Engineering role. This individual will attend trade shows, present to customers, obtain RFQ’s, help create winning custom solutions, execute quotations, and develop in-depth knowledge of target markets, customers, and applications. This role will work closely with all internal departments supporting new project launches, existing project execution, quality related initiatives, and control of sensitive information. To apply, email resume to Pam Breedlove: pamela.breedlove@winkelmann-flowforming.us.

Younchang

Manufactures metals for the automotive and non-automotive industries.

No current listings